XSTRAND GF30 PP Black | 2.85mm | 2200g pet X/Y Stepper driver for the

X/Y Stepper driver for the Raise3D N2 Series 3D Printers

Recommended heated bed temperature: 50-70°C

and enables you to easily print objects that would not be possible by other methods

The part cooling airflow is nearly doubled as two auxiliary cooling fans are installed on the left and right sides of the chamber

the sensor will automatically detect when a material has run out and will pause your project until you to return

XSTRAND GF30 PP Black | 2.85mm | 2200g pet X/Y Stepper driver for theXSTRAND GF30 PP is designed for functional prototyping and demanding applications such as transportation, electronics, and sports & leisure. GF30 PP is a reinforced polypropylene filament with 30% glass fiber content. Technical Data Sheet Safety Data Sheet About XSTRAND Up to 250% stronger than common filaments, XSTRAND GF30 PP AND GF30 PA6 ensure high performance and wear resistance in the most extreme conditions. Developed with superior durability,