CMT 251.042.10 ITK Fine Finish Saw Blade 10" x 5/8" T40 ATB Deck-Drive DCU Screw Plugs Is the ECC94ROT suitable for

Is the ECC94ROT suitable for use in areas subject to earthquake or high-wind conditions

Install with 10d common nails and 3/4 in

The GFC34 is designed specifically for use with the Simpson Strong-Tie GCN-MEPMAG and GCNMEP gas-actuated concrete nailers

Hook Angle 16 degrees

Wide variety of fastening applications supported by compatible Quik Drive systems

CMT 251.042.10 ITK Fine Finish Saw Blade 10" x 5/8" T40 ATB Deck-Drive DCU Screw Plugs Is the ECC94ROT suitable forThe CMT ITK Fine Finish 10 inch Saw Blade is optimized for 10 inch corded and cordless saws. Handles ripping and crosscutting in hardwood, softwood, plywood, OSB, and pressure treated lumber with a fine, clean finish. SPECIFICATIONS Diameter 10" (254mm) Number of Teeth 40 Bore Diameter 5 8" Tooth Grind Type Alternate Top Bevel (ATB) 15 degrees Kerf Thickness 0. 110" Plate Thickness 0. 071" Hook Angle 15 degrees Maximum RPM 6,000 Coating Orange Chrome